DINITROL 9100 PU KIT 310ml Box of 12 + Primer
DINITROL
£168.00
(Inc. Tax)
£140.00
(Ex. Tax)
** As from 24th August 2023 adequate training is required before industrial or professional use of this product ** DINITROL 9100 PU Windscreen Fitting Kit, bonding adhesive glue sealant 5 Star product as used by the leading car manufacturers DINITROL 9100 PU is a humidity-curing and one component polyurethane for the direct-glazing of automotive glasses. The adhesive DINITROL 9100 PU includes the following properties: Heating not required Good adhesion on paints
Fast curing and high modulus
Low odour
Excellent working characteristics
Very good standing properties
Short cut off string
High elasticity Solvent and PVC free OEM approved
Ageing and weather resistant
Safe to use on all car glass
DINITROL 9100 PU is an aftermarket product designed for use in combination with the Dinitrol surface treatment products DINITROL 520 and 538 for bonding automotive glass Kit Contains:
12 x 310ml PUR 9100 PU tubes
12 x FELT BUDS for applying Cleaner & Primer
1 x PUR 538-100ml Black Body & Glass 1-step Multifunction Primer
1 x INSTRUCTION SHEET
Safe drive away time 30 minutes, starting at -18⁰C cold applied
Safe drive away time is the amount of time an adhesive requires to reach the level of strength necessary to safely hold a windscreen in place in the event of a crash.
This means it meets the following crash test standards:
FMVSS 208 - occupant crash protection FMVSS 212 - windscreen mounting FMVSS 216 - roof crush resistance test
Genuine products supplied from The UK Distributor for DINITROL
Do you see rusty cars nowadays? - No because DINITROL supply over 90% of European car manufacturers and are the main supplier for vehicle rust proofing to the Ministry of Defence CLICK HERE FOR DINITROL DATASHEETS
Fast curing and high modulus
Low odour
Excellent working characteristics
Very good standing properties
Short cut off string
High elasticity Solvent and PVC free OEM approved
Ageing and weather resistant
Safe to use on all car glass
DINITROL 9100 PU is an aftermarket product designed for use in combination with the Dinitrol surface treatment products DINITROL 520 and 538 for bonding automotive glass Kit Contains:
12 x 310ml PUR 9100 PU tubes
12 x FELT BUDS for applying Cleaner & Primer
1 x PUR 538-100ml Black Body & Glass 1-step Multifunction Primer
1 x INSTRUCTION SHEET
Safe drive away time 30 minutes, starting at -18⁰C cold applied
Safe drive away time is the amount of time an adhesive requires to reach the level of strength necessary to safely hold a windscreen in place in the event of a crash.
This means it meets the following crash test standards:
FMVSS 208 - occupant crash protection FMVSS 212 - windscreen mounting FMVSS 216 - roof crush resistance test
Genuine products supplied from The UK Distributor for DINITROL
Do you see rusty cars nowadays? - No because DINITROL supply over 90% of European car manufacturers and are the main supplier for vehicle rust proofing to the Ministry of Defence CLICK HERE FOR DINITROL DATASHEETS
The Company will give the Purchaser the benefit of any warranty it receives from its supplier but shall not be liable for any claim or claims for any indirect or consequential damage or loss (including loss of profit) arising from any breach by it or its contract or any defect in the goods PROVIDED that this exclusion shall not apply to death or personal injury or to liability for breach of obligation under Section 13, 14 or 15 of the Sale of Goods Act 1979 as against a Purchaser who is a consumer as defined by Section 12 of the Unfair Contract Terms Act 1977.
- Short Description:
- DINITROL 9100 PU KIT 310ml Box of 12 + Primer