DINITROL 444 Zincprime Spray light is a quick-drying corrosion protection product with long-term effectiveness for all metals. The material combination of metallic zinc and aluminium pigments makes this product particularly user-friendly, given that in contrast to pure zinc dust paints, it is adapted optically to zinc-plated surfaces. DINITROL 444 Zincprime Spray light ensures low consumption. Light spraying is enough to achieve a protection film of 20 – 30 microns.
Application
DINITROL 444 can be sprayed with synthetic resin lacquers after approx. 20 – 30 minutes. If the synthetic resin lacquer is to be applied with a brush, wait 1 hour before proceeding. DINITROL 444 Zinc Paint Spray light can be treated with nitrocellulose, chloride rubber or other aggressive lacquers after approx 1 hour. These lacquers are applied in light coats. If the lacquers are to be applied with a brush, please wait 24 hours before proceeding. Synthetic resin thinner can be used as a cleaning agent.
Pre-Treatment Substrates
Substrate shall be dry, clean and free from corrosion.
Over-Coating
DINITROL 444 can be over applied with laquers and corrosion preventatives.
Technical Data
The Company will give the Purchaser the benefit of any warranty it receives from its supplier but shall not be liable for any claim or claims for any indirect or consequential damage or loss (including loss of profit) arising from any breach by it or its contract or any defect in the goods PROVIDED that this exclusion shall not apply to death or personal injury or to liability for breach of obligation under Section 13, 14 or 15 of the Sale of Goods Act 1979 as against a Purchaser who is a consumer as defined by Section 12 of the Unfair Contract Terms Act 1977.
DINITROL
DINITROL
DINITROL
DINITROL
