Dinitrol 4941 underbody rust prevention

Dinitrol 4941 underbody wax is a thixotropic rust protection product. Thixotropic means that the wax skins over the surface to which is is applied but remains soft underneath allowing for expansion and contraction. It is also self healing, so if the underbody is chipped by a stone Dinitrol wax will migrate across to repair the damage. 

After application it leaves a tough, black elastic and waxy film, giving excellent protection against corrosion and abrasion. 

Dinitrol 4941 is also suitable as transport and storage protection in very corrosive environments. 

Dinitrol 4941 black underbody wax

Available to purchase as a single 1 litre can or bulk order of 3, 6 or 12 cans.

Dinitrol 4941 is a rust preventative coating which provides long-term resistance against corrosion and abrasion even under extreme conditions. After application it dries to a tough elastic, waxy coating to give maximum  protection to the underbody of your car.

This is what customers say about Dinitrol 4941

" Can't recommend this stuff highly enough, far better than old fashioned underseal and just as tough, use it on all my cars to protect them, water just beads on it, no sign of penetration at all."

" We really like all of these products, the under body wax does a great job of keeping corrosion at bay and it leaves a nice finish that it touch dry but never dries out fully or cracks. I would 100% recommend this product"

DINITROL 4941 underbody wax aerosol 500ml

Dinitrol 4941 is supplied as 500ml aerosol can and offers long term resistance against corrosion and abrasion even under extreme conditions. Once applied the solvents disperse leaving a tough black elastic protective film that is heat resistant with added bonus of offering a degree of sound deadening.

The  Dinitrol 4941 aerosol spray can has to be used at room temperature. (16− 25°C)

• Shake spray can until the steel mixing balls can be clearly heard.
• Apply to clean surfaces that are free from corrosion, dust and grease.
• Recommended spraying distance is 20-30 cm.
• To ensure an optimal rust protection thicker layers can be applied in separate steps.
• Allow to dry at room temperature for at least 15 minutes between applications.

In order to prevent blocking of the nozzle, turn the can up-side down and empty the pipe. 

This is what a customer had to say about Dinitrol 4941 aerosol

" Easy to put on. Good product. Nice and easy to put on and spreads well. Only minor fault it is Matt finish I would like a gloss finish. But under the car who is going to see it and bought for the protection and not for the finish!"

Rejel is a Dinitrol authorised distributor to the UK and Northern Ireland. We have years of experience selling Dinitrol rust prevention products. If you are unsure which Dinitrol product to use on your car or commercial vehicle, give us a call on 01234 273388 and we will advice you accordingly.